Samsung Galaxy Note 4 SM-N916L Stock Rom Fix Korea marshmallow 6.0.1



Fix on stock Firmware N916LKLU2DPH6_N916LLUC2DPH6_N916LKLU1DPG2

Pass:www.kampucheadl.com-N916L-Fix

Link Download Fix_Stock_SM-N916L_6.0.1_kampucheadl.com

Feature : 

Remove Korea on KeyDial Remove Korea app system rooted and all stock Firmware.

Flashing requirements:
- Odin Tool (Download)
- Desired firmware package
- Samsung device drivers (Download)

Flashing guide:
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
     Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.

4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar file from the extracted folder.

7. Finally press the start button to begin flashing the firmware update on your device.


Share on Google Plus

About Unknown

    Blogger Comment
    Facebook Comment

16 comments:

  1. is it original stock rom or custom rom ?

    ReplyDelete
  2. what about Main logo LG U+ logo plz tell us ? ??

    ReplyDelete
    Replies
    1. http://www.kampucheadl.com/2017/01/rom-fix-samsung-galaxy-note-4-sm-n916l.html

      Delete
    2. nothing change on boot animation

      Delete
    3. for changing the boot animation you need to flash a custom recovery and download a flashable boot animation

      Delete
  3. password not working plz upload frsh password

    ReplyDelete
  4. This comment has been removed by the author.

    ReplyDelete
  5. Replies
    1. This comment has been removed by the author.

      Delete
    2. Password: copy and paste the below link

      www.kampucheadl.com-N916L-Fix

      Delete
  6. Password: www.kampucheadl.com-N916L-Fix

    ReplyDelete
  7. Galaxy Note 4 SM-N916L LTE (Korean Model)
    Device Locked issue , As a result camera,SD card and Bluetooth are not working (Error:Security policy restrict camera from launching)
    I have tried every solution but still its not working.

    ReplyDelete
  8. Flashing guide:
    before flashing go to recovery factory/data reset then start flashing

    1. Download and extract a zip file containing your desired firmware.
    2. Open Odin Tool.
    3. Boot your device in the "Download Mode":
    Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.

    4. Connect your device to PC via the USB cable while in download mode.
    5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
    6. Hit the AP/PDA button then browse and select a tar file from the extracted folder.

    7. Finally press the start button to begin flashing the firmware update on your device.

    ReplyDelete